| Symptom | Likely Cause | Solution | |--------|-------------|----------| | Water spurts out around the plunger base | Poor seal (bowl shape or plunger too small) | Use a larger flange plunger or a (better for odd-shaped bowls). | | Plunger pushes water up but no suction on the pull | The clog is past the trap (deeper in the drain) or you have a vent issue | Need a longer tool (see Step 4). | | Water slowly drains after plunging, but toilet still clogs on next flush | Partial clog (toilet paper or soft debris) | Keep plunging with more aggressive pulls, or use hot water + dish soap. | | No movement at all – water stays high | Solid object (toy, toothbrush, tampon applicator) | Plunger won’t work. Need an auger. | Step 4: Move beyond the plunger If plunging fails after 5 minutes of trying, escalate:
Pushing down hard and fast. This just compresses air and water, which can break the wax seal under the toilet or splash dirty water out. plunger not working to unclog toilet