Manager - Netgear Configuration

copy running-config startup-config Copies the currently active configuration (in RAM) to non-volatile flash memory.

Copy running configuration to startup configuration. This operation may take a few minutes. Please wait... ............... Configuration Copied Successfully. To back up your switch configuration to a TFTP server (useful for disaster recovery): netgear configuration manager

Since "Netgear Configuration Manager" can refer to the web-based GUI for backing up/restoring configs or the CLI for managed switches, here is a you might use via CLI (telnet/SSH) on a Netgear M-Series or S-Series managed switch to save and manage configurations. Piece: Save Running-Config to Startup-Config (CLI) This is the most critical command to ensure your changes persist after a reboot. Please wait

It sounds like you're looking for a specific configuration snippet or command related to (often part of Netgear ProSAFE or NETGEAR Business devices, like switches, access points, or routers). To back up your switch configuration to a

copy startup-config tftp://192.168.1.100/switch_backup.cfg (Replace 192.168.1.100 with your TFTP server IP) If you need to clear all current configuration (often done before re-deployment):